MFT-31C-W is a feature packed Muti-format wall-mounted HDBaseT Transmitter with a USB-C and 2x HDMI inputs. The HDMI or USB-C Slimport video signals can be selected (Auto/Manual) and extended to 70m @ 1080P or 40m @ 4K30 using a single cat6 cable. Full control of HDCP up to 2.2, along with an extensive choice of built in EDID or the connected display EDID.
The remote display can be turned ON/OFF (Auto/Manual) upon video detection or push-button, using RS232, IR or CEC. The SY-PCTools utility program simplifies customisation of parameters such as display ON/OFF commands, OFF command delay, EDID and HDCP management etc.
The pass-through RS232 port is also used for setup as well as control/monitoring of the unit. Both a remote and a built-in IR sensor are provided for extra flexibility.
PoC (Power over Cable) facility ensures installation flexibility, as only a single PSU is required to power both the transmitter and receiver units. The Slim70-R is an optimal HDBaseT Receiver choice. The MFT-31C is also available in Brushed aluminium finish. Designed to fit into a Standard UK double gang back box. (A VGA input version is available - MFT-31V-W, (VGA & 2x HDMI inputs).
Many customers use this solution as a standard fit into podiums and multiple meeting rooms within a large venue complex, further offering an easy to use and consistent way of connecting users' devices to in-room displays with minimal effort. Fit and Forget. MFT31 units are the perfect choice for use in classrooms, meeting rooms or board rooms where a laptop, mobile or similar devices require accessible connection.
Features
- HDMI inputs (2)
- USB-C input
- HDBaseT output
- 40m @ 4K30 or 70m @ 1080p
- HDCP control
- RS232 control and pass-through
- Built in IR Eye (Pass-through and Learning)
- Auto/Manual input selection
- Auto/Manual Display On/Off control
- Bi-directional PoC
Video Inputs
2x HDMI
1x USB-C
VIDEO RESOLUTIONS/FORMATS:
VESA and SMPTE up to 2160p with 3D
All HDMI resolutions up to 3840x2160 @ 30Hz 4:4:4 / 60Hz 4:2:0
All PC resolutions up to 1920x1200 @ 60Hz
HDMI
1.4
BANDWIDTH
10.2Gbps
HDCP
1.4, 2.2, Cascade mode
MAXIMUM HDBaseT RANGE
40m - 4K30 4:4:4 / 4K60 4:2:0
70m - 1080p60
CONTROL
RS232
IR
Front Panel buttons
Auto-Switching
CEC
RS232 communication settings:
9600 bps
8 data-bits No parity 1 stop bit No handshaking
POWER
Power Supply
24V DC @ 1.25A via 2 pin phoenix screw terminal connector
Power Consumption
5W max. (excluding HDBaseT Receiver)
Environmental
Operating Temperature
-10 to +40°C (+14 to +104°F)
Operating Humidity
10 to 90 % RH (non-condensing)
PHYSICAL
Weight (net)
0.235kg
Dimension (WHD)
UK: 146 x 86 x 43mm
Case Material
Aluminium
Finish
White or Aluminium
WHAT’S IN THE BOX
1x MFT-31C-W
2x 3 pin phoenix screw terminal connectors
1x 24V DC 1.25A PSU with UK and EU plug adapters
1x User’s Manual